2.0L Duratec SBD/Omega Slipper Piston Set 87.50mm
We have designed a 2 ring slipper piston for the 2-litre Duratec with the help of Omega & the latest improvements in design that they have gained through GP bike development, we have produced a new forging specifically for this piston. It is of a much stiffer construction, uses a smaller lighter pin at 18mm and we have also moved the pin closer to the crown of the piston, which helps to reduce piston rock which also helps to reduce friction.
It is ultra-lightweight & low friction; in initial tests we saw a 7bhp increase in our high spec engine simply by changing the pistons along with new matching rods.
2.0L Duratec 87.50mm Slipper Piston Estimated Compression Ratio Chart
Note – All volumes must be checked on every engine build, we cannot be held responsible for errors – Information is for guidance only
For use with our 2.0L Duratec con-rods: ROD-FD-2.0DUR-152 & ROD-FD-2.0DUR-152-02.