+44 208 391 0121
Now, with better user experience

Menu

Mini Cart

Duratec 2.0/2.3/2.4/2.5L Camshaft Pair 262deg includes Vernier Pulleys

MRP Without VAT:£655.50

MRP With VAT:£786.60

998 in stock

Instruction Sheets: SBD Cam Timing and Lift Sheet
Instruction Sheets: Camshaft running in procedure
Instruction Sheets: Duratec Camshaft fitting instructions

Description

Duratec Camshaft Pair 262deg/10.07mm Lift includes Vernier Pulleys

CM-DUR01

These cams have been designed for use with throttle bodies with no internal modifications required to the engine. This includes vernier pulleys. We would normally expect to see approx 15bhp* increase.
For use with standard pistons, valve springs, caps & platforms.

2.0L/2.3L/2.4L/2.5L 16V Duratec Inlet cam 10.07mm lift, 262 degrees duration, TDC lift at No4 cylinder: 1.67mm
2.0L/2.3L/2.4L/2.5L 16V Duratec Exhaust cam 10.07mm lift, 262 degrees duration, TDC lift at No4 cylinder: 1.35mm

Using in our Duratec Taper Throttle Kit TP-KIT-FD-DUR2-0L-214.

Note: These could be used on a standard intake system but only with the use of a motorsport ECU.

Please note that these camshafts are ground to order and will take approximately 5 working days, please ensure you have ordered the correct components as they are non-returnable.

All SBD camshafts have been designed in conjunction with Kent Cams and extensively tested on the dynamometer.

*Power gains can only be achieved provided your engine has the components to complement it. E.g. exhaust manifold & system, induction system & cylinder head porting where required. If you look at our upgrade kits they will give you more help.

Please see camshaft information and fitting instruction sheets shown above.

998 in stock