Duratec bellhousing for long input shaft 192mm
The Duratec bellhousings we produce are for coupling to the Ford Type gearbox and we produce 2 lengths of bellhousings. This long version is 192cm long and is for use with the Ford V6 gearbox (Caterham normally use this length) or if you wish to mount the engine further away from the gearbox & you are having a gearbox specially built with a long input shaft.
This bellhousing is designed for use with an hydraulic clutch slave cylinder mechanism
Important note: It should be noted that if you have a Quaife gearbox, the input shaft quite often comes with a long spigot, this may need to be shortened by the user as it will bottom out in the end of the crankshaft. Care must be taken when checking the bellhousing length required, that the spigot shaft is not giving a false reading making it appear that the bellhousing you require is actually shorter than measured.