+44 208 391 0121
Now, with better user experience

Menu

Mini Cart

Duratec 2.0L Steel Rod Set

MRP Without VAT:£737.00

MRP With VAT:£884.40

999 in stock

Instruction Sheets: RB3-L19 Rod Bolt Instructions

Description

Duratec 2.0L Steel Rod Set

ROD-FD-2.0DUR-146S

Duratec 2.0L steel rod set. We have designed this rod to replace the standard fragile item, it has a bronze small end bush, which replaces the press-fit version. Ideal for use with our piston. These rods have been tested extensively by ourselves to over 9000rpm on standard crankshaft & over 9500rpm on a steel crankshaft. So beware of cheap imitations!
Weight approx 455g
Centre to centre length approx 146mm
This design of rod has several improvements which benefit the engine. There are two vertical grooves on the side of the rod, this directs the oil spray as it exits the big end vertically upwards towards the pin and the crown of the piston,. This has two benefits, it helps to supply lubricant directly to the gudgeon pin also the cool jet of oil to the underside of the crown of the piston helps to reduce the temperature of the piston itself. On the small end, we have repositioned the oil hole which feeds the small end bush. This is because the one at the top which is normally used effectively weakens the rod itself which increases the possibility of breakage when the rod is brought down by the crankshaft. By moving the oil hole to the side of the rod, there is far more material in this area to help maintain its strength.
Because of the above modifications it is no longer necessary to supply an oil feed through the bearing, even if your bearing still has a hole for the oil jet, it does not reduce its improvement, the hole is simply filled with oil and the pressure in this area is maintained.

999 in stock