2.0L XE Hydraulic Camshaft Pair 284/278 for D/less Engines

Description

2.0L XE Camshaft Pair, Hydraulic Profiles for Distributorless Engines

CM16V2-H284-278-PR

This pair of SBD H284 & H278 camshafts have been designed give about 15 -20 BHP* over standard cams, without compromising the drivability of the standard engine, they produce a power band of 2500 – 7500 RPM.

CM16V2-H284IN – 2.0L 16V Inlet cam
11.4mm lift, 284 deg duration, TDC lift at No4 cylinder: 2.75mm
CM16V2-H278EXS – 2.0L 16V Short exhaust cam
11.03mm lift, 278 deg duration, TDC lift at No4 cylinder: 2.55mm

We recommend the following additional valve train components:
Piston Recommendation: SBD/Omega pistons with compression ratio of 11.2:1 (98RON fuel)
Cam follower type: CMFL-1S
Valve cap & platform type: VLC-6K-S & VLP-9K
Valve spring type: VLS-06K
Vernier Pulleys depending on the age of your engine: CMVP-1 or CMVP-4

Used in our XE taper throttle kit TP-KIT-VX-XE2-0L-225.

Please note that these camshafts are ground to order and will take approximately 5 working days, please ensure you have ordered the correct components as they are non-returnable.

All SBD camshafts have been designed in conjunction with Kent Cams and extensively tested on the dynamometer.

*Power gains can only be achieved provided your engine has the components to complement it. E.g. exhaust manifold & system, induction system & cylinder head porting where required. If you look at our upgrade kits they will give you more help.

Please see instruction sheets for information regarding the camshafts, their installation & running in.