Description

Duratec Flywheel with Integral Ring Gear 215mm

FLY-W-DUR-01A

This flywheel is designed for motorsport use. Normally used on Caterhams ,Westfields and RWD conversions.
Duratec lightweight steel flywheel, 215mm (8 1/2″) with integral ring gear.
Weighs approx 4.89kg.
The outside diameter of the ring gear is 288mm, this standard diameter and tooth pattern and therefore can be used with the standard starter motor or an uprated version.
Designed for Seven type cars (Caterham/Westfield) up to 230bhp, can be used in Escort type vehicles for light road use and engine under 210bhp.

Fiesta ST150 note: This flywheel fits with a standard starter on most Duratec engines, however the Fiesta ST150 has a smaller flywheel as standard so you would need to measure the inside of the bellhousing to confirm that there is sufficient clearance and it may require modification. You will also need to fit a starter motor from another standard Duratec engine, which uses the standard diameter size flywheel. Please check what diameter your flywheel is before ordering. We do not make a direct replacement flywheel specifically for the Fiesta ST150 engine.

The standard Duratec clutch & flywheel assembly is not suitable for competition use & therefore has to be replaced with a suitable combination.